Raytek Non-Contact thermometers

Infrared technology in the palm of your hand

Raytek infrared thermometer

The Raynger ST Series of handheld, noncontact thermometers uses infrared technology to measure the temperature of materials up close, or from a distance. You simply aim, pull the trigger, and read the temperature on a large, backlit LCD display. Lightweight, compact, and easy-to-use, the Raynger ST can safely measure hot, hazardous, or hard-to-reach materials without contaminating or damaging the material's surface. For safe and accurate temperature measurement, reach for a Raytek
from E TIP.

Choice of models

Raynger ST20XB

The ST20XB features 1% accuracy, Extra Bright Laser Point Sighting, emissivity pre-set to 0.95, D:S (Distance to Spot size) of 12:1, temperature range -32 degrees to 535 degrees C (-25 degrees to 999 degrees F) and a MAX temperature display.

Raynger ST60XB

The ST60XB features 1% accuracy, Extra Bright Laser Point Sighting, adjustable emissivity, D:S (Distance to Spot size) of 30:1, temperature range -32 degrees to 600 degrees C (-25 degrees to 1100 degrees F), HI/LO alarm, and MAX, MIN, DIFF and AVG temperature display.

Raynger ST80XB

The ST80XB features 1% accuracy, Extra Bright Laser Point Sighting, adjustable emissivity, D:S (Distance to Spot size) of 50:1, temperature range -32 degrees to 760 degrees C (-25 degrees to 1400 degrees F), HI/LO alarm, and MAX, MIN, DIFF and AVG temperature display.

Raynger ST80XB-IS

The Intrinsically Safe Raynger Model ST80XB-IS features 1% accuracy, Extra Bright Laser Point Sighting, adjustable emissivity, D:S (Distance to Spot size) of 50:1, temperature range -32 degrees to 760 degrees C (-25 degrees to 1400 degrees F), HI/LO alarm, and MAX, MIN, DIFF and AVG temperature display and is well suited to hazardous environment applications.

Raytek MiniTemp MT2/MT4

The Raytek MiniTemp MT2/MT4 features between 2% and 3% accuracy, Laser sighting (MT4 only), emissivity pre-set to 0.95, D:S (Distance to Spot Size): 8:1, and a temperature range of -18 to 275 degrees C (0 to 525 degrees F).

Raytek MiniTemp is pocket-sized and easy to use -just point, shoot and read the temperature on the large backlit display. When you need a fast, easy, safe way to measure surface temperature, you need a MiniTemp noncontact thermometer. Use MiniTemp at work, at home, anywhere. Choose between MiniTemp MT2, no laser sighting, or MiniTemp MT4, with laser sighting. Both models are powered by a 9V battery and display temperatures in either Celsius or Fahrenheit. An accessory pack including a pouch and wrist strap is also available.

Raytek MiniTemp FSIR

The MiniTemp FSIR features 1% accuracy, Single Point Laser Sighting, emissivity pre-set to 0.97, D:S (Distance to Spot size) of 4:1, and measures temperatures from -30 degrees C to 200 degrees C (-25 degrees F to 400 degrees F).

The MiniTemp FS infrared (IR) thermometer, designed specifically for use with food products, measures surface temperatures accurately and instantly to assure safe storage, cooking and serving environments. Calibrated to provide high accuracy in the critical Hazard Analysis Critical Control Points (HACCP) zone of 40 to 140 degrees F where harmful bacteria grow most rapidly makes it an essential food safety tool for all foodservice workers everywhere.

Applications

Automotive

Troubleshoot engines, including ignition system problems and fuel/air adjustments. Diagnose cooling systems, including thermostats and coolant sensors; radiators; catalytic converters; brakes, and tires. Perform climate control maintenance with precision.

HVAC

Balance room temperatures, monitor supply/return registers, and test duct work; examine steam traps and check furnace performance; perform energy audits.

Food Safety

Perform HACCP temperature measurements at receiving. Check cold and hot cooking, holding, and serving temperatures, and ensure sate and uniform storage and transportation temperatures. Maintain freezers, walk-ins, ovens, ranges, and dishwashers. Food inspectors can quickly confirm application temperatures.

Industrial/Electrical

Detect and troubleshoot facility electrical and process maintenance problems... before they happen, including vehicle and fleet maintenance. Check electrical panels for hot spots, find defective transformers, and detect loose electrical connections.

Other Applications

Roofing, asphalt, and concrete applications; commercial printing; plastics molding; tire detection/prevention; race car, aviation, and marine maintenance.

Request more information for this product

Safety

Safe T Plus Steering Controls
Strobe Lights
Caution: Wide Turn
Personal Strobe Light
LZ kit

Security

Physical Mobile Radio Security
Radio Cage
Slide Lock
King Pin Lock
Pintle Hitch Lock
Skid Lock
PortaSafe
LockAlarm
Aerial Work Platform
Control Module Security Lock

Maintenance

Non Contact Thermometer
Universal Preheaters
Professional Debris Picker
EZ Reacher®

About ETIP, Inc.

Press / Media
ETIP Store on ebay
ETIP Videos
About ETIP, Inc.
Freight / Shipping
Contact Us



We reserve the right to change product specifications at any time without notice and without obligation.


 Veteran Owned
 Small Business

Google Analytics Alternative